Skip to content
  • $1,495.00

    HEATWAVE MILK WARMER

    Pyon Products

    Increase the rate of gain on your young stock with the HEATWAVE cost effective milk feeding system that is easy to clean! The HEATWAVE MILK WARM...

    View full details
    $1,495.00
  • $1,995.00

    SRS2 Tru-Test Electronic Identification (EID) Stick Reader

    Tru-Test

    The SRS2 EID Stick Reader makes scanning easy.  Quickly read, record and transfer your livestock EID Tag information with the durable, easy to use ...

    View full details
    $1,995.00
  • $13.00

    Heatwave Machine Cleaning Tablets

    Pyon Products

    One box of cleaning tablets should last for about 6 weeks of cleaning your Heatwave Milk Warmer.   This product has been tested with the Heatwave t...

    View full details
    $13.00
  • $2.95

    Heatwave Calf Teat

    Pyon Products

    The Heatwave Milk Warmer comes with 4 calf teats. Extras can be purchased so you don't need to worry about running out.

    $2.95
  • $16.05

    Bubble Pump for Heatwave Milk Warmer

    Pyon Products

    The Bubble pump will allow you to clean the pipes and prime the system easily, quickly and without disconnecting pipes.  Two Bubble Pumps come stan...

    View full details
    $16.05
  • $5.40

    Silicone Tube for Heatwave Milk Warmer (per Meter)

    Pyon Products

    The picture shows a role of 5 meters of silicone tubing. The price is $5.40 per meter.  Silicone Tubing for 4 nipples comes standard with the purch...

    View full details
    $5.40
  • $8.10

    Bulkhead Push-Fit Assembly for Heatwave Milk Warmer 8mm

    Pyon Products

      The Bulkhead Push-Fit Assembly helps to attach the silicone tube to the Heatwave Milk Warmer.   

    $8.10
  • $1.95

    Straight Barbed Pipe Connector for Heatwave Milk Warmer

    Pyon Products

    The Straight Barbed Pipe Connector connects the silicone tube at a point where the pump can be connected. It is always great to have some of these ...

    View full details
    $1.95
  • $1.35

    Collet for Heatwave Milk Warmer 8mm

    Pyon Products

     The Collet is Part of the Heatwave Bulkhead Push fit Assembly 8mm which helps to attach the silicone tube to the Heatwave Milk Warmer.   

    $1.35
  • $5.95

    Non-Return Valve for Heatwave Milk Warmer

    Pyon Products

     The Non-Return Valve is a key component in the Heatwave Milk Warmer as it helps prevent milk from dripping out of the teats as well as keeping mil...

    View full details
    $5.95
  • $54.55

    Heat Exchange Coil for Heatwave Milk Warmer

    Pyon Products

     The Heatwave Exchange Coil is a key component in the Heatwave Milk Warmer as it is needed to warm the milk for the youngstock. It is important to ...

    View full details
    $54.55
  • $15.20

    Barrel Tap 10mm Outlet for Heatwave Milk Warmer

    Pyon Products

     The Barrel Tap doesn't automatically come with the purchase of the Heatwave Milk Warmer but is  recommended if using a barrel for feeding calves. ...

    View full details
    $15.20
  • $3.05

    Y Connector 6mm for Heatwave Milk Warmer

    Pyon Products

     The 6mm Y Connector is used for connecting silicone tubes for the Heatwave Milk Warmer.

    $3.05
  • $2.65

    Plastic Push-in Connector for Heatwave Milk Warmer

    Pyon Products

     The Plastic Push-in Connector is used for connecting the silicone tubes to other components in  the Heatwave Milk Warmer.

    $2.65
  • $1.20

    Yellow Filter for Heatwave Milk Warmer

    Pyon Products

     The Yellow Filter is used at the end of silicone tubes to help keep large pieces out that might plug up the Heatwave Milk Warmer.

    $1.20
  • $9.65

    Teat Bayonet Fitting and screws for Heatwave Milk Warmer

    Pyon Products

     The Teat Bayonet fittings used for the Heatwave Milk Warmer fit the Lamb/Goat starter teats, regular teats and calf teats. 

    $9.65
  • $5.85

    Metal Connector/Weight for Heatwave Milk Warmer

    Pyon Products

     The Metal Connector/Weight is used with the silicone tubes for the Heatwave Milk Warmer 

    $5.85
  • $9.95

    Standard Stokbord Plate - Pre Drilled for Heatwave Milk Warmer

    Pyon Products

     The Standard Stockbord Plate is used to mount the Bayonet Fittings for the Heatwave Milk Warmer 

    $9.95
  • $7.70

    Reducing "Y" Connector 10mm to 2x 6mm for Heatwave Milk Warmer

    Pyon Products

    The Heatwave Reducing "Y" Connector 10mm to 2x 6mm can be used with a barrel tap in a large storage container to connect the silicone tubes of the ...

    View full details
    $7.70
  • $2.15

    Wrench -8mm for Heatwave Milk Warmer

    Pyon Products

     The 8mm open ended wrench can be used to press in the on collet on the Heatwave Bulkhead Push fit Assembly unit to help release the connectors. Af...

    View full details
    $2.15
  • $28.95

    Inlet Pair for Heatwave Milk Warmer

    Pyon Products

    Heatwave Inlet pipes (Pair) includes Silicone tube, 2 Yellow filters, 2 Stainless steel weights, 2 Straight Barbed connectors, and 2 Plastic connec...

    View full details
    $28.95
  • $45.00

    Inlet Pair including Bubble Pumps for Heatwave Milk Warmer

    Pyon Products

    Heatwave Inlet pipes (Pair) with Bubble Pumps includes Silicone tube, 2 Yellow filters, 2 Stainless steel weights, 2 Inline Bubble Pumps, and 2 Pla...

    View full details
    $45.00
  • $44.00

    Outlet Pair for Heatwave Milk Warmer

    Pyon Products

    Heatwave Outlet pipes (Pair) includes Silicone tube, 2 "Y" Connectors, 4 non-return valves and 2 Plastic connectors to fit into the Heatwave Milk W...

    View full details
    $44.00
  • from $65.00

    Mitrocin for Heatwave Machine Cleaning

    Dairy Supply Store

    One gallon of Mitrocin cleaner should allow for about 128 weeks of cleaning your Heatwave Milk Warmer and 8oz. can last about 16 weeks. This produc...

    View full details
    from $65.00
  • $49.50

    VS Injector Ink Stamp -Simcro

    Datamars

    Use the ink stamps to mark your treated livestock with the Simcro VS Injector guns. Each stamp should be able to mark about 300 livestock. Comes in...

    View full details
    $49.50
  • $10.00

    VS Non-Needle Guard Assembly -Simcro

    Datamars

    Non-Needle Guard Assembly. Use with Simcro VS Injector guns.

    $10.00
  • from $45.95

    Grober Bovine Dried Colostrum - Calf's Choice Total

    Grober Nutrition

    Grober's High Quality Calf Colostrum can be purchased in 700 g or 4.7 kg packaging. Natural bovine dried colostrum replaces or supplements materna...

    View full details
    from $45.95
  • $5.95

    Right Angle Connector 10mm to 6mm for Heatwave Milk Warmer

    Pyon Products

    The Heatwave Right Angle Connector 10mm to 6mm can be used to connect the silicone tubes of the outlet pipes coming from the Heatwave Milk Warmer. ...

    View full details
    $5.95
  • $299.50

    THERMOSTAT SUB-ASSEMBLY (Parts for Heatwave)

    Pyon Products

     The Thermostat sub - assembly for repair of the Heatwave Milk Warmer.  This item is very seldom requested for repair.   

    $299.50
  • $11.95

    THERMAL CUT OUT SWITCH 55 deg. c (Parts for Heatwave)

    Pyon Products

     The Thermal cutout switch is for repair of the Heatwave Milk Warmer.  This item is occasionally requested for repair.   

    $11.95
  • $17.95

    13 AMP CIRCUIT BREAKER (Parts for Heatwave)

    Pyon Products

     The 13 amp circuit breaker is for repair of the Heatwave Milk Warmer.  This item is sometimes requested for repair and could be helpful to have on...

    View full details
    $17.95
  • $245.00

    1500 Mat Heater (Parts for Heatwave)

    Pyon Products

     The 1500 Mat heater is for repair of the Heatwave Milk Warmer.  This item is seldom requested for repair.

    $245.00