Products

The 1200HD is a 24 Bushel Advantage Feeder holding approximately 1200 lbs of barley.  It allows you to *Control Feed, Free Choice Feed or **Creep F...

 The 13 amp circuit breaker is for repair of the Heatwave Milk Warmer.  This item is sometimes requested for repair and could be helpful to have on...

 The 1500 Mat heater is for repair of the Heatwave Milk Warmer.  This item is seldom requested for repair.

150 Litre Heavy Duty Advantage Feeder - Holds aprox. 200lbs of barley.  Allows you to Control feed or Free choice Feed Grain to all ages and types ...

  The 2500HD is a 51 Bushel Advantage Feeder holding approximately 2500 lbs of barley.  It allows you to *Control Feed, Free Choice Feed or **Creep...

The 5300HD is a 108 Bushel Advantage Feeder holding approximately 5300 lbs of barley.  It allows you to *Control Feed, Free Choice Feed or **Creep ...

160 Bushel Heavy Duty Advantage Feeder for Cattle- Holds aprox. 8000lbs of barley.  Allows you to Control feed or Free choice Feed or *Creep Feed ...

STRONGER, LAST LONGER, MORE CONTROL Run at 60-90 PSI Compatible with 1/8, 3/16 and 1/4 rivets It weighs 6.6 lbs *An Air Tool is required to assem...

The Ameri Ag feedbunk's are high quality just like the mineral feeders. They are tapered out at the bottom so stock won't tip them over and waste f...

As Tough as Your Livestock With a one piece design, polyethylene makeup, built-in ultraviolet inhibitors, and no metal parts other than a metal eye...

Built in a solid three-piece 180 lb rotational-molded form factor, and UV inhibitors built in, the Quad Feeder has nothing to rust, rot, or replace...

 The Barrel Tap doesn't automatically come with the purchase of the Heatwave Milk Warmer but is  recommended if using a barrel for feeding calves. ...

The Bubble pump will allow you to clean the pipes and prime the system easily, quickly and without disconnecting pipes.  Two Bubble Pumps come stan...

  The Bulkhead Push-Fit Assembly helps to attach the silicone tube to the Heatwave Milk Warmer.   

Features of the CGN - Cattle Creep Gate for the 1200HD Advantage Feeders: Adjustable height horizontal bar Hot gal dipped SHS Latch system to hold...

Features of the CGW - Cattle Creep Gate for the 5300HD, M5300HD, 2500HD and M2500HD Advantage Feeders: Adjustable height horizontal bar Hot gal di...

 The Collet is Part of the Heatwave Bulkhead Push fit Assembly 8mm which helps to attach the silicone tube to the Heatwave Milk Warmer.   

The CGNA Creep Gate can be folded up and out of the way still allowing the roof to be opened and the feeder filled. It latches open and closed. The...

Fair Bale Processors Huber Ag Equipment is a western Canadian dealer for Fair Manufacturing’s 7825 Bale Processor. Located in South Dakota, Fair Ma...

Grober's High Quality Calf Colostrum can be purchased in 700 g or 4.7 kg packaging. Natural bovine dried colostrum replaces or supplements materna...

COLOSTRUM - THE MOST IMPORTANT MEAL LambGro KidGro colostrum™ is a premium colostrum supplement that provides triple benefit protection from hypoth...

ASK US ABOUT LARGER ORDER DISCOUNTS. The Grober mildly acidified milk replacer makes an excellent fit with the Heatwave Milk Warmer and other autom...

Designed in conjunction with the Pen-Pal HayBoss Feeder, the Hay-Buddy can help you transport square bales anywhere they need to go with ease. The ...

HayBoss Feeders HayBoss Feeders™ is a revolutionary, no-waste feeding system that provides safe and clean forage for animals of any size. We believ...

Sheep and Goat Guard The Standard Goat and Sheep Guard is a 26” wide, solid tarp like material to be installed on the top inside portion of the net...

HayBoss Feeders HayBoss Feeders™ is a revolutionary, no-waste feeding system that provides safe and clean forage for animals of any size. We believ...

HayBoss Ring Feeders Introducing the HayBoss Ring Feeders! At HayBoss Feeders, we are always innovating and bringing out products tha...

 The Heatwave Exchange Coil is a key component in the Heatwave Milk Warmer as it is needed to warm the milk for the youngstock. It is important to ...

The Heatwave Milk Warmer comes with 4 calf teats. Extras can be purchased so you don't need to worry about running out.

One box of cleaning tablets should last for about 6 weeks of cleaning your Heatwave Milk Warmer.   This product has been tested with the Heatwave t...

Increase the rate of gain on your young stock with the HEATWAVE cost effective milk feeding system that is easy to clean! The HEATWAVE MILK WARM...

The Teatguard has been developed to help extend the life of lamb nipples. They help prevent bullying, protect the teats and encourage a good suckin...

Main features:  Manufactured in Scotland  Heavy-duty circular feed ring 10 feed spaces Solid sheet metal skirt ribbed for strength Ideal for ho...

Wire Hay Rack - 3ft length Main Features Single sided hook-over hay rack with deep hooks and securing bolts All welded, hot dipped galvanized fini...

Heatwave Inlet pipes (Pair) includes Silicone tube, 2 Yellow filters, 2 Stainless steel weights, 2 Straight Barbed connectors, and 2 Plastic connec...

Heatwave Inlet pipes (Pair) with Bubble Pumps includes Silicone tube, 2 Yellow filters, 2 Stainless steel weights, 2 Inline Bubble Pumps, and 2 Pla...

The Ritchie Lamb Creep Panel is robustly constructed with tubular steel frame.  The spacing is easily adjusted between the rollers. You steel rolle...

28 Bushel mobile Advantage Feeder. Allows you to Control feed or Free choice Feed or *Creep Feed Grain to Livestock. It comes with a creep panel fo...

51 Bushel mobile Advantage Feeder - Holds aprox. 2500lbs of barley.  Allows you to Control feed or Free choice Feed or *Creep Feed Grain to all age...

The M5300HD is a 108 Bushel mobile Advantage Feeder holding approximately 5300 lbs of barley.  It allows you to *Control Feed, Free Choice Feed or ...

The Mobile 160 Bushel Heavy Duty Advantage Feeder for Cattle- Holds aprox. 8000lbs of barley.  It allows you to Control feed or Free choice Feed o...

 The Metal Connector/Weight is used with the silicone tubes for the Heatwave Milk Warmer 

The Advantage Feeders Mineral Attachment holds 240 lbs of lose mineral and helps to keep the mineral dry as well as from contamination. This minera...

One gallon of Mitrocin cleaner should allow for about 128 weeks of cleaning your Heatwave Milk Warmer and 8oz. can last about 16 weeks. This produc...

 The Non-Return Valve is a key component in the Heatwave Milk Warmer as it helps prevent milk from dripping out of the teats as well as keeping mil...

Heatwave Outlet pipes (Pair) includes Silicone tube, 2 "Y" Connectors, 4 non-return valves and 2 Plastic connectors to fit into the Heatwave Milk W...

 The Plastic Push-in Connector is used for connecting the silicone tubes to other components in  the Heatwave Milk Warmer.

The Heatwave Reducing "Y" Connector 10mm to 2x 6mm can be used with a barrel tap in a large storage container to connect the silicone tubes of the ...