Products

The 1200HD is a 24 Bushel Advantage Feeder holding approximately 1200 lbs of barley.  It allows you to *Control Feed, Free Choice Feed or **Creep F...

 The 13 amp circuit breaker is for repair of the Heatwave Milk Warmer.  This item is sometimes requested for repair and could be helpful to have on...

 The 1500 Mat heater is for repair of the Heatwave Milk Warmer.  This item is seldom requested for repair.

  The 2500HD is a 51 Bushel Advantage Feeder holding approximately 2500 lbs of barley.  It allows you to *Control Feed, Free Choice Feed or **Creep...

The 5300HD is a 108 Bushel Advantage Feeder holding approximately 5300 lbs of barley.  It allows you to *Control Feed, Free Choice Feed or **Creep ...

160 Bushel Heavy Duty Advantage Feeder for Cattle- Holds aprox. 8000lbs of barley.  Allows you to Control feed or Free choice Feed or *Creep Feed ...

 The Barrel Tap doesn't automatically come with the purchase of the Heatwave Milk Warmer but is  recommended if using a barrel for feeding calves. ...

The Bubble pump will allow you to clean the pipes and prime the system easily, quickly and without disconnecting pipes.  Two Bubble Pumps come stan...

  The Bulkhead Push-Fit Assembly helps to attach the silicone tube to the Heatwave Milk Warmer.   

 The Collet is Part of the Heatwave Bulkhead Push fit Assembly 8mm which helps to attach the silicone tube to the Heatwave Milk Warmer.   

The Ritchie Digital Weigh-Head Conversion Kit gives you another option for weighing.  Main features:  Compatible with 345G, 660G and 663G Convers...

Grober's High Quality Calf Colostrum can be purchased in 700 g or 4.7 kg packaging. Natural bovine dried colostrum replaces or supplements materna...

The Grober mildly acidified milk replacer makes an excellent fit with the Heatwave Milk Warmer and other automatic milk feeders to provide small, m...

 The Heatwave Exchange Coil is a key component in the Heatwave Milk Warmer as it is needed to warm the milk for the youngstock. It is important to ...

The Heatwave Milk Warmer comes with 4 calf teats. Extras can be purchased so you don't need to worry about running out.

One box of cleaning tablets should last for about 6 weeks of cleaning your Heatwave Milk Warmer.   This product has been tested with the Heatwave t...

Increase the rate of gain on your young stock with the HEATWAVE cost effective milk feeding system that is easy to clean! The HEATWAVE MILK WARM...

Wire Hay Rack - 3ft length Main Features Single sided hook-over hay rack with deep hooks and securing bolts All welded, hot dipped galvanized fini...

Heatwave Inlet pipes (Pair) includes Silicone tube, 2 Yellow filters, 2 Stainless steel weights, 2 Straight Barbed connectors, and 2 Plastic connec...

Heatwave Inlet pipes (Pair) with Bubble Pumps includes Silicone tube, 2 Yellow filters, 2 Stainless steel weights, 2 Inline Bubble Pumps, and 2 Pla...

51 Bushel mobile Advantage Feeder - Holds aprox. 2500lbs of barley.  Allows you to Control feed or Free choice Feed or *Creep Feed Grain to all age...

The Mobile 160 Bushel Heavy Duty Advantage Feeder for Cattle- Holds aprox. 8000lbs of barley.  It allows you to Control feed or Free choice Feed o...

 The Metal Connector/Weight is used with the silicone tubes for the Heatwave Milk Warmer 

One gallon of Mitrocin cleaner should allow for about 128 weeks of cleaning your Heatwave Milk Warmer and 8oz. can last about 16 weeks. This produc...

 The Non-Return Valve is a key component in the Heatwave Milk Warmer as it helps prevent milk from dripping out of the teats as well as keeping mil...

Heatwave Outlet pipes (Pair) includes Silicone tube, 2 "Y" Connectors, 4 non-return valves and 2 Plastic connectors to fit into the Heatwave Milk W...

 The Plastic Push-in Connector is used for connecting the silicone tubes to other components in  the Heatwave Milk Warmer.

The Heatwave Reducing "Y" Connector 10mm to 2x 6mm can be used with a barrel tap in a large storage container to connect the silicone tubes of the ...

The Heatwave Right Angle Connector 10mm to 6mm can be used to connect the silicone tubes of the outlet pipes coming from the Heatwave Milk Warmer. ...

 Main features:  Robust unit with easily adjusted header rail to exclude cows from feed area Easily located using joining pins Hot dipped galvan...

Main features:  Minimizes stress to stock and operator The neck yoke is operated by single lever which automatically locks at any position and is...

The Ritchie calf weighing and dehorning crate is fitted with a digital load cell for accurate measurements and has fully sheeted sides with entry g...

Spring, autumn or year-round calving, the Ritchie Calving Cube is a versatile asset for any cattle breeder. The rigid steel frame weighs approximat...

This Ritchie Calving Gate features a number of unique benefits to help stock farmers improve stock handling safety.The securing gate, with its uniq...

The picture shows a role of 5 meters of silicone tubing. The price is $5.40 per meter.  Silicone Tubing for 4 nipples comes standard with the purch...

The Sliding Gate Hay Feeder is a great feeder for sheep and goats if using the large or small square bales.  This feeder is being used for calves a...

The Te Pari LPG Calf Dehorner comes standard with the 18 mm dehorning tips. Sizes 14mm, 16mm, 18mm, and 20mm tips can be purchased as spares.   

The SRS2 EID Stick Reader makes scanning easy.  Quickly read, record and transfer your livestock EID Tag information with the durable, easy to use ...

 The Standard Stockbord Plate is used to mount the Bayonet Fittings for the Heatwave Milk Warmer 

The Straight Barbed Pipe Connector connects the silicone tube at a point where the pump can be connected. It is always great to have some of these ...

QUICK, EFFECTIVE AND EFFICIENT. The Te Pari LPG Calf Dehorner is a NZ-made, fully portable LPG gas fired unit that will constantly maintain a high ...

 The Teat Bayonet fittings used for the Heatwave Milk Warmer fit the Lamb/Goat starter teats, regular teats and calf teats. 

 The Thermal cutout switch is for repair of the Heatwave Milk Warmer.  This item is occasionally requested for repair.   

 The Thermostat sub - assembly for repair of the Heatwave Milk Warmer.  This item is very seldom requested for repair.   

Simcro VS Injector Designed for swine and beef producers, the Simcro VS Injector gives you ultimate flexibility to protect you, your staff, your...

Use the ink stamps to mark your treated livestock with the Simcro VS Injector guns. Each stamp should be able to mark about 300 livestock. Comes in...

Non-Needle Guard Assembly. Use with Simcro VS Injector guns.

 The 8mm open ended wrench can be used to press in the on collet on the Heatwave Bulkhead Push fit Assembly unit to help release the connectors. Af...