Skip to content

Sheep and Goat Products

Huber Ag Equipment sells sheep and goat equipment from a variety of different companies. Some of our main sellers to sheep and goat producers are the Advantage Feeders, the Ritchie Combi Clamp and Jug Waterers.  We have more panels and gates and lambing jugs, etc. available as well as some new products we are introducing such as the Te Pari dosing gun. 

Our goal is to find equipment to help increase efficiency in your sheep or goat operation. We have had sheep and/or goats for almost 25 years so understand some of the challenges that sheep producers face. Let us know how we can help you. 

 Contact us for more information

  • from $1,885.00

    1200HD Advantage Feeder (Formerly 800HD 3in1Feeder)

    Advantage Feeders

    The 1200HD is a 24 Bushel Advantage Feeder holding approximately 1200 lbs of barley.  It allows you to *Control Feed, Free Choice Feed or **Creep F...

    View full details
    from $1,885.00
  • $1,495.00

    HEATWAVE MILK WARMER

    Pyon Products

    Increase the rate of gain on your young stock with the HEATWAVE cost effective milk feeding system that is easy to clean! The HEATWAVE MILK WARM...

    View full details
    $1,495.00
  • from $3,530.00

    5300HD Advantage Feeder (Formerly 3800HD 3in1Feeder)

    Advantage Feeders

    The 5300HD is a 108 Bushel Advantage Feeder holding approximately 5300 lbs of barley.  It allows you to *Control Feed, Free Choice Feed or **Creep ...

    View full details
    from $3,530.00
  • from $1,835.00

    Sliding Gate Hay Feeder

    Advantage Feeders

    The Sliding Gate Hay Feeder is a great feeder for sheep and goats if using the large or small square bales.  This feeder is being used for calves a...

    View full details
    from $1,835.00
  • m2500HD Advantage Feeder, Sheep creep Feeder, Calf Creep Feeder, Goat Creep Feeder
    from $4,560.00

    M2500HD Mobile Advantage Feeder (Formerly M1800HD 3in1Feeder)

    Advantage Feeders

    51 Bushel mobile Advantage Feeder - Holds aprox. 2500lbs of barley.  Allows you to Control feed or Free choice Feed or *Creep Feed Grain to all age...

    View full details
    from $4,560.00
  • 2500HD Advantage Feeder, Calf Creep Feeder, Sheep Creep Feeder, Goat Creep Feeder, Lamb Feeder
    from $2,995.00

    2500HD Advantage Feeder (Formerly 1800HD 3in1Feeder)

    Advantage Feeders

      The 2500HD is a 51 Bushel Advantage Feeder holding approximately 2500 lbs of barley.  It allows you to *Control Feed, Free Choice Feed or **Creep...

    View full details
    from $2,995.00
  • $1,995.00

    SRS2 Tru-Test Electronic Identification (EID) Stick Reader

    Tru-Test

    The SRS2 EID Stick Reader makes scanning easy.  Quickly read, record and transfer your livestock EID Tag information with the durable, easy to use ...

    View full details
    $1,995.00
  • $13.00

    Heatwave Machine Cleaning Tablets

    Pyon Products

    One box of cleaning tablets should last for about 6 weeks of cleaning your Heatwave Milk Warmer.   This product has been tested with the Heatwave t...

    View full details
    $13.00
  • $16.05

    Bubble Pump for Heatwave Milk Warmer

    Pyon Products

    The Bubble pump will allow you to clean the pipes and prime the system easily, quickly and without disconnecting pipes.  Two Bubble Pumps come stan...

    View full details
    $16.05
  • $5.40

    Silicone Tube for Heatwave Milk Warmer (per Meter)

    Pyon Products

    The picture shows a role of 5 meters of silicone tubing. The price is $5.40 per meter.  Silicone Tubing for 4 nipples comes standard with the purch...

    View full details
    $5.40
  • $8.10

    Bulkhead Push-Fit Assembly for Heatwave Milk Warmer 8mm

    Pyon Products

      The Bulkhead Push-Fit Assembly helps to attach the silicone tube to the Heatwave Milk Warmer.   

    $8.10
  • $1.95

    Straight Barbed Pipe Connector for Heatwave Milk Warmer

    Pyon Products

    The Straight Barbed Pipe Connector connects the silicone tube at a point where the pump can be connected. It is always great to have some of these ...

    View full details
    $1.95
  • $1.35

    Collet for Heatwave Milk Warmer 8mm

    Pyon Products

     The Collet is Part of the Heatwave Bulkhead Push fit Assembly 8mm which helps to attach the silicone tube to the Heatwave Milk Warmer.   

    $1.35
  • $5.95

    Non-Return Valve for Heatwave Milk Warmer

    Pyon Products

     The Non-Return Valve is a key component in the Heatwave Milk Warmer as it helps prevent milk from dripping out of the teats as well as keeping mil...

    View full details
    $5.95
  • $54.55

    Heat Exchange Coil for Heatwave Milk Warmer

    Pyon Products

     The Heatwave Exchange Coil is a key component in the Heatwave Milk Warmer as it is needed to warm the milk for the youngstock. It is important to ...

    View full details
    $54.55
  • $15.20

    Barrel Tap 10mm Outlet for Heatwave Milk Warmer

    Pyon Products

     The Barrel Tap doesn't automatically come with the purchase of the Heatwave Milk Warmer but is  recommended if using a barrel for feeding calves. ...

    View full details
    $15.20
  • $3.05

    Y Connector 6mm for Heatwave Milk Warmer

    Pyon Products

     The 6mm Y Connector is used for connecting silicone tubes for the Heatwave Milk Warmer.

    $3.05
  • $2.65

    Plastic Push-in Connector for Heatwave Milk Warmer

    Pyon Products

     The Plastic Push-in Connector is used for connecting the silicone tubes to other components in  the Heatwave Milk Warmer.

    $2.65
  • $1.20

    Yellow Filter for Heatwave Milk Warmer

    Pyon Products

     The Yellow Filter is used at the end of silicone tubes to help keep large pieces out that might plug up the Heatwave Milk Warmer.

    $1.20
  • $9.65

    Teat Bayonet Fitting and screws for Heatwave Milk Warmer

    Pyon Products

     The Teat Bayonet fittings used for the Heatwave Milk Warmer fit the Lamb/Goat starter teats, regular teats and calf teats. 

    $9.65
  • $5.85

    Metal Connector/Weight for Heatwave Milk Warmer

    Pyon Products

     The Metal Connector/Weight is used with the silicone tubes for the Heatwave Milk Warmer 

    $5.85
  • $9.95

    Standard Stokbord Plate - Pre Drilled for Heatwave Milk Warmer

    Pyon Products

     The Standard Stockbord Plate is used to mount the Bayonet Fittings for the Heatwave Milk Warmer 

    $9.95
  • $7.70

    Reducing "Y" Connector 10mm to 2x 6mm for Heatwave Milk Warmer

    Pyon Products

    The Heatwave Reducing "Y" Connector 10mm to 2x 6mm can be used with a barrel tap in a large storage container to connect the silicone tubes of the ...

    View full details
    $7.70
  • $2.15

    Wrench -8mm for Heatwave Milk Warmer

    Pyon Products

     The 8mm open ended wrench can be used to press in the on collet on the Heatwave Bulkhead Push fit Assembly unit to help release the connectors. Af...

    View full details
    $2.15
  • $28.95

    Inlet Pair for Heatwave Milk Warmer

    Pyon Products

    Heatwave Inlet pipes (Pair) includes Silicone tube, 2 Yellow filters, 2 Stainless steel weights, 2 Straight Barbed connectors, and 2 Plastic connec...

    View full details
    $28.95
  • $45.00

    Inlet Pair including Bubble Pumps for Heatwave Milk Warmer

    Pyon Products

    Heatwave Inlet pipes (Pair) with Bubble Pumps includes Silicone tube, 2 Yellow filters, 2 Stainless steel weights, 2 Inline Bubble Pumps, and 2 Pla...

    View full details
    $45.00
  • $44.00

    Outlet Pair for Heatwave Milk Warmer

    Pyon Products

    Heatwave Outlet pipes (Pair) includes Silicone tube, 2 "Y" Connectors, 4 non-return valves and 2 Plastic connectors to fit into the Heatwave Milk W...

    View full details
    $44.00
  • from $65.00

    Mitrocin for Heatwave Machine Cleaning

    Dairy Supply Store

    One gallon of Mitrocin cleaner should allow for about 128 weeks of cleaning your Heatwave Milk Warmer and 8oz. can last about 16 weeks. This produc...

    View full details
    from $65.00
  • $49.50

    VS Injector Ink Stamp -Simcro

    Datamars

    Use the ink stamps to mark your treated livestock with the Simcro VS Injector guns. Each stamp should be able to mark about 300 livestock. Comes in...

    View full details
    $49.50
  • from $70.00

    VS Injector - Simcro

    Datamars

    Simcro VS Injector Designed for swine and beef producers, the Simcro VS Injector gives you ultimate flexibility to protect you, your staff, your...

    View full details
    from $70.00
  • $10.00

    VS Non-Needle Guard Assembly -Simcro

    Datamars

    Non-Needle Guard Assembly. Use with Simcro VS Injector guns.

    $10.00
  • $5.95

    Right Angle Connector 10mm to 6mm for Heatwave Milk Warmer

    Pyon Products

    The Heatwave Right Angle Connector 10mm to 6mm can be used to connect the silicone tubes of the outlet pipes coming from the Heatwave Milk Warmer. ...

    View full details
    $5.95
  • $135.00

    Hook Over Hay Basket

    Ritchie

    Wire Hay Rack - 3ft length Main Features Single sided hook-over hay rack with deep hooks and securing bolts All welded, hot dipped galvanized fini...

    View full details
    $135.00
  • $299.50

    THERMOSTAT SUB-ASSEMBLY (Parts for Heatwave)

    Pyon Products

     The Thermostat sub - assembly for repair of the Heatwave Milk Warmer.  This item is very seldom requested for repair.   

    $299.50
  • $11.95

    THERMAL CUT OUT SWITCH 55 deg. c (Parts for Heatwave)

    Pyon Products

     The Thermal cutout switch is for repair of the Heatwave Milk Warmer.  This item is occasionally requested for repair.   

    $11.95
  • $17.95

    13 AMP CIRCUIT BREAKER (Parts for Heatwave)

    Pyon Products

     The 13 amp circuit breaker is for repair of the Heatwave Milk Warmer.  This item is sometimes requested for repair and could be helpful to have on...

    View full details
    $17.95