Filters
Sheep and Goat Products
Huber Ag Equipment sells sheep and goat equipment from a variety of different companies. Some of our main sellers to sheep and goat producers are the Advantage Feeders, the Ritchie Combi Clamp and Jug Waterers. We have more panels and gates and lambing jugs, etc. available as well as some new products we are introducing such as the Te Pari dosing gun.
Our goal is to find equipment to help increase efficiency in your sheep or goat operation. We have had sheep and/or goats for almost 25 years so understand some of the challenges that sheep producers face. Let us know how we can help you.
Contact us for more information
-
$1,495.00
HEATWAVE MILK WARMER
Pyon ProductsIncrease the rate of gain on your young stock with the HEATWAVE cost effective milk feeding system that is easy to clean! The HEATWAVE MILK WARM...
View full details$1,495.00Sale -
from $2.50
Lamb Teats for Heatwave
Pyon ProductsThe Heatwave Milk Machine comes with 4 lamb nipples but these extra lamb teats can be purchased as needed. Although these look very similar and can...
View full detailsfrom $2.50Sale -
$19.95
Heatwave Teatguard
Pyon ProductsThe Teatguard has been developed to help extend the life of lamb nipples. They help prevent bullying, protect the teats and encourage a good suckin...
View full details$19.95Sale -
$13.00
Heatwave Machine Cleaning Tablets
Pyon ProductsOne box of cleaning tablets should last for about 6 weeks of cleaning your Heatwave Milk Warmer. This product has been tested with the Heatwave t...
View full details$13.00Sale -
$3.00
Lamb/Goat Starter Teat for Heatwave
Pyon ProductsThe starter teats can help get young lambs and goat kids adjust more quickly to the Heatwave Milk Machine. The Heatwave comes with 4 regular lamb n...
View full details$3.00Sale -
$16.05
Bubble Pump for Heatwave Milk Warmer
Pyon ProductsThe Bubble pump will allow you to clean the pipes and prime the system easily, quickly and without disconnecting pipes. Two Bubble Pumps come stan...
View full details$16.05Sale -
$5.40
Silicone Tube for Heatwave Milk Warmer (per Meter)
Pyon ProductsThe picture shows a role of 5 meters of silicone tubing. The price is $5.40 per meter. Silicone Tubing for 4 nipples comes standard with the purch...
View full details$5.40Sale -
$8.10
Bulkhead Push-Fit Assembly for Heatwave Milk Warmer 8mm
Pyon ProductsThe Bulkhead Push-Fit Assembly helps to attach the silicone tube to the Heatwave Milk Warmer.
$8.10Sale -
$1.95
Straight Barbed Pipe Connector for Heatwave Milk Warmer
Pyon ProductsThe Straight Barbed Pipe Connector connects the silicone tube at a point where the pump can be connected. It is always great to have some of these ...
View full details$1.95Sale -
$1.35
Collet for Heatwave Milk Warmer 8mm
Pyon ProductsThe Collet is Part of the Heatwave Bulkhead Push fit Assembly 8mm which helps to attach the silicone tube to the Heatwave Milk Warmer.
$1.35Sale -
$5.95
Non-Return Valve for Heatwave Milk Warmer
Pyon ProductsThe Non-Return Valve is a key component in the Heatwave Milk Warmer as it helps prevent milk from dripping out of the teats as well as keeping mil...
View full details$5.95Sale -
$54.55
Heat Exchange Coil for Heatwave Milk Warmer
Pyon ProductsThe Heatwave Exchange Coil is a key component in the Heatwave Milk Warmer as it is needed to warm the milk for the youngstock. It is important to ...
View full details$54.55Sale -
$15.20
Barrel Tap 10mm Outlet for Heatwave Milk Warmer
Pyon ProductsThe Barrel Tap doesn't automatically come with the purchase of the Heatwave Milk Warmer but is recommended if using a barrel for feeding calves. ...
View full details$15.20Sale -
$3.05
Y Connector 6mm for Heatwave Milk Warmer
Pyon ProductsThe 6mm Y Connector is used for connecting silicone tubes for the Heatwave Milk Warmer.
$3.05Sale -
$2.65
Plastic Push-in Connector for Heatwave Milk Warmer
Pyon ProductsThe Plastic Push-in Connector is used for connecting the silicone tubes to other components in the Heatwave Milk Warmer.
$2.65Sale -
$1.20
Yellow Filter for Heatwave Milk Warmer
Pyon ProductsThe Yellow Filter is used at the end of silicone tubes to help keep large pieces out that might plug up the Heatwave Milk Warmer.
$1.20Sale -
$9.65
Teat Bayonet Fitting and screws for Heatwave Milk Warmer
Pyon ProductsThe Teat Bayonet fittings used for the Heatwave Milk Warmer fit the Lamb/Goat starter teats, regular teats and calf teats.
$9.65Sale -
$5.85
Metal Connector/Weight for Heatwave Milk Warmer
Pyon ProductsThe Metal Connector/Weight is used with the silicone tubes for the Heatwave Milk Warmer
$5.85Sale -
$9.95
Standard Stokbord Plate - Pre Drilled for Heatwave Milk Warmer
Pyon ProductsThe Standard Stockbord Plate is used to mount the Bayonet Fittings for the Heatwave Milk Warmer
$9.95Sale -
$7.70
Reducing "Y" Connector 10mm to 2x 6mm for Heatwave Milk Warmer
Pyon ProductsThe Heatwave Reducing "Y" Connector 10mm to 2x 6mm can be used with a barrel tap in a large storage container to connect the silicone tubes of the ...
View full details$7.70Sale -
$2.15
Wrench -8mm for Heatwave Milk Warmer
Pyon ProductsThe 8mm open ended wrench can be used to press in the on collet on the Heatwave Bulkhead Push fit Assembly unit to help release the connectors. Af...
View full details$2.15Sale -
$28.95
Inlet Pair for Heatwave Milk Warmer
Pyon ProductsHeatwave Inlet pipes (Pair) includes Silicone tube, 2 Yellow filters, 2 Stainless steel weights, 2 Straight Barbed connectors, and 2 Plastic connec...
View full details$28.95Sale -
$45.00
Inlet Pair including Bubble Pumps for Heatwave Milk Warmer
Pyon ProductsHeatwave Inlet pipes (Pair) with Bubble Pumps includes Silicone tube, 2 Yellow filters, 2 Stainless steel weights, 2 Inline Bubble Pumps, and 2 Pla...
View full details$45.00Sale -
$44.00
Outlet Pair for Heatwave Milk Warmer
Pyon ProductsHeatwave Outlet pipes (Pair) includes Silicone tube, 2 "Y" Connectors, 4 non-return valves and 2 Plastic connectors to fit into the Heatwave Milk W...
View full details$44.00Sale