Livestock Products

Increase the rate of gain on your young stock with the HEATWAVE cost effective milk feeding system that is easy to clean! The HEATWAVE MILK WARM...

Jaylor Single Auger TMR Mixer With four models to choose from, the Jaylor single auger, vertical feed mixers are among our most popular and versa...

As Tough as Your Livestock With a one piece design, polyethylene makeup, built-in ultraviolet inhibitors, and no metal parts other than a metal eye...

The Tray Hay Feeder by Advantage Feeders is made out of Galvanized Steel and the Tray area is Stainless Steel.  The basket is adjustable in height....

Fair Bale Processors Huber Ag Equipment is a western Canadian dealer for Fair Manufacturing’s 7825 Bale Processor. Located in South Dakota, Fair Ma...

HayBoss Feeders HayBoss Feeders™ is a revolutionary, no-waste feeding system that provides safe and clean forage for animals of any size. We believ...

Jaylor’s Horizontal Quad Auger TMR Mixers are designed by cattlemen for cattlemen. Our years of experience with feedlot rations guarantees you the ...

Built in a solid three-piece 180 lb rotational-molded form factor, and UV inhibitors built in, the Quad Feeder has nothing to rust, rot, or replace...

The M5300HD is a 108 Bushel mobile Advantage Feeder holding approximately 5300 lbs of barley.  It allows you to *Control Feed, Free Choice Feed or ...

Features of the CGN - Cattle Creep Gate for the 1200HD Advantage Feeders: Adjustable height horizontal bar Hot gal dipped SHS Latch system to hold...

Features of the CGW - Cattle Creep Gate for the 5300HD, M5300HD, 2500HD and M2500HD Advantage Feeders: Adjustable height horizontal bar Hot gal di...

STRONGER, LAST LONGER, MORE CONTROL Run at 60-90 PSI Compatible with 1/8, 3/16 and 1/4 rivets It weighs 6.6 lbs *An Air Tool is required to assem...

The Sliding Gate Hay Feeder is a great feeder for sheep and goats if using the large or small square bales.  This feeder is being used for calves a...

Main Features:  Adjustable M16 eyebolts to facilitate easy installation Internally vented Treated timber panels Dimensions Length 15 FT ...

Main Features of the Feed Bunk Panel:  Adjustable M16 eyebolts to facilitate easy installation Easily adjustable height feed rails Treated timber...

Main Features:  Adjustable M16 eyebolts to facilitate easy installation Internally vented Treated timber panels Dimensions Length 10 FT ...

Main features:  Heavy-duty, quality diagonal railed barriers Available with or without timber skirt attached Hot dipped galvanized finish We ha...

Main features:  Manufactured in Scotland  10 feed spaces  Ideal for horned cattle and calves  Supplied in five sections for easy assembly  Hot...

Main features:  Manufactured in Scotland  Heavy-duty circular feed ring 10 feed spaces Solid sheet metal skirt ribbed for strength Ideal for ho...

 Main features:  Robust unit with easily adjusted header rail to exclude cows from feed area Easily located using joining pins Hot dipped galvan...

This robust Ritchie feed & water trough has no sharp corners to trap feed and is easy to clean. It has deep hanging hooks to fit over fencing.

The Ritchie Lamb Creep Panel is robustly constructed with tubular steel frame.  The spacing is easily adjusted between the rollers. You steel rolle...

The CGNA Creep Gate can be folded up and out of the way still allowing the roof to be opened and the feeder filled. It latches open and closed. The...

The Advantage Feeders Mineral Attachment holds 240 lbs of lose mineral and helps to keep the mineral dry as well as from contamination. This minera...

The Mobile 160 Bushel Heavy Duty Advantage Feeder for Cattle- Holds aprox. 8000lbs of barley.  It allows you to Control feed or Free choice Feed o...

160 Bushel Heavy Duty Advantage Feeder for Cattle- Holds aprox. 8000lbs of barley.  Allows you to Control feed or Free choice Feed or *Creep Feed ...

150 Litre Heavy Duty Advantage Feeder - Holds aprox. 200lbs of barley.  Allows you to Control feed or Free choice Feed Grain to all ages and types ...

The 1200HD is a 24 Bushel Advantage Feeder holding approximately 1200 lbs of barley.  It allows you to *Control Feed, Free Choice Feed or **Creep F...

The 5300HD is a 108 Bushel Advantage Feeder holding approximately 5300 lbs of barley.  It allows you to *Control Feed, Free Choice Feed or **Creep ...

51 Bushel mobile Advantage Feeder - Holds aprox. 2500lbs of barley.  Allows you to Control feed or Free choice Feed or *Creep Feed Grain to all age...

Jaylor Mini TMR Mixers are ideal for a wide range of applications, including feeding smaller dairies when starting out, and specialty groups such a...

  The 2500HD is a 51 Bushel Advantage Feeder holding approximately 2500 lbs of barley.  It allows you to *Control Feed, Free Choice Feed or **Creep...

The Teatguard has been developed to help extend the life of lamb nipples. They help prevent bullying, protect the teats and encourage a good suckin...

One box of cleaning tablets should last for about 6 weeks of cleaning your Heatwave Milk Warmer.   This product has been tested with the Heatwave t...

The Heatwave Milk Warmer comes with 4 calf teats. Extras can be purchased so you don't need to worry about running out.

The Bubble pump will allow you to clean the pipes and prime the system easily, quickly and without disconnecting pipes.  Two Bubble Pumps come stan...

The picture shows a role of 5 meters of silicone tubing. The price is $5.40 per meter.  Silicone Tubing for 4 nipples comes standard with the purch...

  The Bulkhead Push-Fit Assembly helps to attach the silicone tube to the Heatwave Milk Warmer.   

The Straight Barbed Pipe Connector connects the silicone tube at a point where the pump can be connected. It is always great to have some of these ...

 The Collet is Part of the Heatwave Bulkhead Push fit Assembly 8mm which helps to attach the silicone tube to the Heatwave Milk Warmer.   

 The Non-Return Valve is a key component in the Heatwave Milk Warmer as it helps prevent milk from dripping out of the teats as well as keeping mil...

 The Heatwave Exchange Coil is a key component in the Heatwave Milk Warmer as it is needed to warm the milk for the youngstock. It is important to ...

 The Barrel Tap doesn't automatically come with the purchase of the Heatwave Milk Warmer but is  recommended if using a barrel for feeding calves. ...

 The 6mm Y Connector is used for connecting silicone tubes for the Heatwave Milk Warmer.

 The Plastic Push-in Connector is used for connecting the silicone tubes to other components in  the Heatwave Milk Warmer.

 The Yellow Filter is used at the end of silicone tubes to help keep large pieces out that might plug up the Heatwave Milk Warmer.

 The Teat Bayonet fittings used for the Heatwave Milk Warmer fit the Lamb/Goat starter teats, regular teats and calf teats. 

 The Metal Connector/Weight is used with the silicone tubes for the Heatwave Milk Warmer