Skip to content

Health & Management, etc.

  • $7,895.00

    Grober ECO Lamb/Kid Feeder

    Grober Nutrition

    The ECO Feeder can feed up to 240 lambs or kids. It comes equipped with a semi-automatic cleaning cycle that is easy to operate. The mixing jar til...

    View full details
    $7,895.00
  • $7,195.00

    Ritchie Combi Clamp Sheep Handling System and Goat Handling System - UPDATED!!

    Ritchie

    NEWLY UPDATED RITCHIE COMBI CLAMP NOW COMES WITH RUBBER FLOORING! The Combi Clamp Sheep & Goat Handling System allows you to process your sheep...

    View full details
    $7,195.00
  • $3,895.00

    Ritchie Draft Pro 3 - Swing Gate Weigh and Draft Sheep all in one!

    Ritchie

    With the convenient Ritchie Draft Pro 3 you can weigh your sheep as well as sort them 3 ways. The Draft Pro has a larger capacity than the lamb wei...

    View full details
    $3,895.00
  • from $3,295.00

    Te Pari Tailing Chutes

    Te Pari

    TAILING CHUTES Save time, money and your back! The Te Pari Tailing Chute is an efficient and practical design to help ranchers save time and money....

    View full details
    from $3,295.00
  • $2,775.00

    Tru-Test Digital Lamb Scale

    Ritchie

    Increased accuracy and convenience come with Ritchie's Tru-Test lamb scales.  A robust fully HDG unit with bi-fold doors front and rear incorporati...

    View full details
    $2,775.00
  • $1,495.00

    HEATWAVE MILK WARMER

    Pyon Products

    Increase the rate of gain on your young stock with the HEATWAVE cost effective milk feeding system that is easy to clean! The HEATWAVE MILK WARM...

    View full details
    $1,495.00
  • from $765.00

    Te Pari Docking Irons

    Te Pari

    DOCKING IRONS Essential docking tools for optimum animal health Tail docking of lambs remains an important husbandry practice in order to maint...

    View full details
    from $765.00
  • advantage feeders, sheep feeder, mineral feeder, mineral feeder for goats, mineral feeder for sheep, mineral feeder for cattle, free choice mineral feeder, hanging mineral feeder
    from $335.00

    Mineral Attachment

    Advantage Feeders

    The Advantage Feeders Mineral Attachment holds 240 lbs of lose mineral and helps to keep the mineral dry as well as from contamination. This minera...

    View full details
    from $335.00
  • $299.50

    THERMOSTAT SUB-ASSEMBLY (Parts for Heatwave)

    Pyon Products

     The Thermostat sub - assembly for repair of the Heatwave Milk Warmer.  This item is very seldom requested for repair.   

    $299.50
  • $245.00

    1500 Mat Heater (Parts for Heatwave)

    Pyon Products

     The 1500 Mat heater is for repair of the Heatwave Milk Warmer.  This item is seldom requested for repair.

    $245.00
  • Save 17%
    Original price $295.00
    Current price $245.00

    Woollie Warmer

    Woollie Warmer

    Woollie Warmer Woollie Warmers are cost effective, easy to use tools for reviving hypothermic lambs born in harsh conditions by immersing them in w...

    View full details
    Original price $295.00
    Current price $245.00
    Save 17%
  • from $150.00

    Rubber Flooring update for the Ritchie Combi Clamp Sheep and Goat Handling System

    Ritchie

    UPDATE YOUR CURRENT COMBI CLAMP WITH THE NEW RUBBER FLOORING. Rubber Flooring update for the 3-Way Sorting Gate and Auto Sort Rubber Flooring upd...

    View full details
    from $150.00
  • from $124.75

    Grober Milk Replacer for use with the Heatwave Milk Warmer

    Grober Nutrition

    ASK US ABOUT LARGER ORDER DISCOUNTS. The Grober mildly acidified milk replacer makes an excellent fit with the Heatwave Milk Warmer and other autom...

    View full details
    from $124.75
  • $114.50

    Wet Nurse Competitive Edge Lamb Milk Replacer for the Heatwave

    PMT Group

    The Wet Nurse Milk Replacer is acidified and can be used for feeding milk in automatic feeders such as the Heatwave Milk Machine. PMT's Wet Nurse™ ...

    View full details
    $114.50
  • from $70.00

    VS Injector - Simcro

    Datamars

    Simcro VS Injector Designed for swine and beef producers, the Simcro VS Injector gives you ultimate flexibility to protect you, your staff, your...

    View full details
    from $70.00
  • from $65.00

    Mitrocin for Heatwave Machine Cleaning

    Dairy Supply Store

    One gallon of Mitrocin cleaner should allow for about 128 weeks of cleaning your Heatwave Milk Warmer and 8oz. can last about 16 weeks. This produc...

    View full details
    from $65.00
  • from $56.95

    Grober Bovine Dried Colostrum - Lambgro Kidgro Colostrum

    Grober Nutrition

    COLOSTRUM - THE MOST IMPORTANT MEAL LambGro KidGro colostrum™ is a premium colostrum supplement that provides triple benefit protection from hypoth...

    View full details
    from $56.95
  • $54.55

    Heat Exchange Coil for Heatwave Milk Warmer

    Pyon Products

     The Heatwave Exchange Coil is a key component in the Heatwave Milk Warmer as it is needed to warm the milk for the youngstock. It is important to ...

    View full details
    $54.55
  • $49.50

    VS Injector Ink Stamp -Simcro

    Datamars

    Use the ink stamps to mark your treated livestock with the Simcro VS Injector guns. Each stamp should be able to mark about 300 livestock. Comes in...

    View full details
    $49.50
  • $45.00

    Inlet Pair including Bubble Pumps for Heatwave Milk Warmer

    Pyon Products

    Heatwave Inlet pipes (Pair) with Bubble Pumps includes Silicone tube, 2 Yellow filters, 2 Stainless steel weights, 2 Inline Bubble Pumps, and 2 Pla...

    View full details
    $45.00
  • $45.00

    Te Pari Docking Iron Heatshield

    Te Pari

    Heatshield for Te Pari Docking Guns. The Te Pari Docking Iron heatshield is designed to fit the original Te Pari Docking Irons. 

    $45.00
  • $44.00

    Outlet Pair for Heatwave Milk Warmer

    Pyon Products

    Heatwave Outlet pipes (Pair) includes Silicone tube, 2 "Y" Connectors, 4 non-return valves and 2 Plastic connectors to fit into the Heatwave Milk W...

    View full details
    $44.00
  • $36.00

    Kerbl Lamb Feeding Bucket

    Remedy Animal Health

    Practical Kerbl Lamb Milk Feeder Bucket plastic. Comes with 5 teats. Order extra lamb teats or extra starter teats.

    $36.00
  • $28.95

    Inlet Pair for Heatwave Milk Warmer

    Pyon Products

    Heatwave Inlet pipes (Pair) includes Silicone tube, 2 Yellow filters, 2 Stainless steel weights, 2 Straight Barbed connectors, and 2 Plastic connec...

    View full details
    $28.95
  • $17.95

    13 AMP CIRCUIT BREAKER (Parts for Heatwave)

    Pyon Products

     The 13 amp circuit breaker is for repair of the Heatwave Milk Warmer.  This item is sometimes requested for repair and could be helpful to have on...

    View full details
    $17.95
  • $16.05

    Bubble Pump for Heatwave Milk Warmer

    Pyon Products

    The Bubble pump will allow you to clean the pipes and prime the system easily, quickly and without disconnecting pipes.  Two Bubble Pumps come stan...

    View full details
    $16.05
  • $15.20

    Barrel Tap 10mm Outlet for Heatwave Milk Warmer

    Pyon Products

     The Barrel Tap doesn't automatically come with the purchase of the Heatwave Milk Warmer but is  recommended if using a barrel for feeding calves. ...

    View full details
    $15.20
  • $13.00

    Heatwave Machine Cleaning Tablets

    Pyon Products

    One box of cleaning tablets should last for about 6 weeks of cleaning your Heatwave Milk Warmer.   This product has been tested with the Heatwave t...

    View full details
    $13.00
  • $11.95

    THERMAL CUT OUT SWITCH 55 deg. c (Parts for Heatwave)

    Pyon Products

     The Thermal cutout switch is for repair of the Heatwave Milk Warmer.  This item is occasionally requested for repair.   

    $11.95
  • $10.00

    VS Non-Needle Guard Assembly -Simcro

    Datamars

    Non-Needle Guard Assembly. Use with Simcro VS Injector guns.

    $10.00
  • $9.95

    Standard Stokbord Plate - Pre Drilled for Heatwave Milk Warmer

    Pyon Products

     The Standard Stockbord Plate is used to mount the Bayonet Fittings for the Heatwave Milk Warmer 

    $9.95
  • $9.65

    Teat Bayonet Fitting and screws for Heatwave Milk Warmer

    Pyon Products

     The Teat Bayonet fittings used for the Heatwave Milk Warmer fit the Lamb/Goat starter teats, regular teats and calf teats. 

    $9.65
  • $8.10

    Bulkhead Push-Fit Assembly for Heatwave Milk Warmer 8mm

    Pyon Products

      The Bulkhead Push-Fit Assembly helps to attach the silicone tube to the Heatwave Milk Warmer.   

    $8.10
  • $7.70

    Reducing "Y" Connector 10mm to 2x 6mm for Heatwave Milk Warmer

    Pyon Products

    The Heatwave Reducing "Y" Connector 10mm to 2x 6mm can be used with a barrel tap in a large storage container to connect the silicone tubes of the ...

    View full details
    $7.70
  • $5.95

    Right Angle Connector 10mm to 6mm for Heatwave Milk Warmer

    Pyon Products

    The Heatwave Right Angle Connector 10mm to 6mm can be used to connect the silicone tubes of the outlet pipes coming from the Heatwave Milk Warmer. ...

    View full details
    $5.95
  • $5.95

    Non-Return Valve for Heatwave Milk Warmer

    Pyon Products

     The Non-Return Valve is a key component in the Heatwave Milk Warmer as it helps prevent milk from dripping out of the teats as well as keeping mil...

    View full details
    $5.95
  • $5.85

    Metal Connector/Weight for Heatwave Milk Warmer

    Pyon Products

     The Metal Connector/Weight is used with the silicone tubes for the Heatwave Milk Warmer 

    $5.85
  • $5.40

    Silicone Tube for Heatwave Milk Warmer (per Meter)

    Pyon Products

    The picture shows a role of 5 meters of silicone tubing. The price is $5.40 per meter.  Silicone Tubing for 4 nipples comes standard with the purch...

    View full details
    $5.40
  • $3.05

    Y Connector 6mm for Heatwave Milk Warmer

    Pyon Products

     The 6mm Y Connector is used for connecting silicone tubes for the Heatwave Milk Warmer.

    $3.05
  • $3.00

    Lamb/Goat Starter Teat for Heatwave

    Pyon Products

    The starter teats can help get young lambs and goat kids adjust more quickly to the Heatwave Milk Machine. The Heatwave comes with 4 regular lamb n...

    View full details
    $3.00
  • $2.65

    Plastic Push-in Connector for Heatwave Milk Warmer

    Pyon Products

     The Plastic Push-in Connector is used for connecting the silicone tubes to other components in  the Heatwave Milk Warmer.

    $2.65
  • from $2.50

    Lamb Teats for Heatwave

    Pyon Products

    The Heatwave Milk Machine comes with 4 lamb nipples but these extra lamb teats can be purchased as needed. Although these look very similar and can...

    View full details
    from $2.50
  • $2.15

    Wrench -8mm for Heatwave Milk Warmer

    Pyon Products

     The 8mm open ended wrench can be used to press in the on collet on the Heatwave Bulkhead Push fit Assembly unit to help release the connectors. Af...

    View full details
    $2.15
  • $1.95

    Straight Barbed Pipe Connector for Heatwave Milk Warmer

    Pyon Products

    The Straight Barbed Pipe Connector connects the silicone tube at a point where the pump can be connected. It is always great to have some of these ...

    View full details
    $1.95
  • $1.35

    Collet for Heatwave Milk Warmer 8mm

    Pyon Products

     The Collet is Part of the Heatwave Bulkhead Push fit Assembly 8mm which helps to attach the silicone tube to the Heatwave Milk Warmer.   

    $1.35
  • $1.20

    Yellow Filter for Heatwave Milk Warmer

    Pyon Products

     The Yellow Filter is used at the end of silicone tubes to help keep large pieces out that might plug up the Heatwave Milk Warmer.

    $1.20