Skip to content

Health & Management, etc.

  • $7,250.00

    Ritchie Calving Cube - 320CALF

    Ritchie

    Spring, autumn or year-round calving, the Ritchie Calving Cube is a versatile asset for any cattle breeder. The rigid steel frame weighs approximat...

    View full details
    $7,250.00
  • from $3,125.00

    Ritchie Calf Weighing Crate on Wheels - 345G & 345GE & 345G-100

    Ritchie

    The Ritchie calf weighing and dehorning crate is fitted with a digital load cell for accurate measurements and has fully sheeted sides with entry g...

    View full details
    from $3,125.00
  • $1,995.00

    SRS2 Tru-Test Electronic Identification (EID) Stick Reader

    Tru-Test

    The SRS2 EID Stick Reader makes scanning easy.  Quickly read, record and transfer your livestock EID Tag information with the durable, easy to use ...

    View full details
    $1,995.00
  • $1,495.00

    HEATWAVE MILK WARMER

    Pyon Products

    Increase the rate of gain on your young stock with the HEATWAVE cost effective milk feeding system that is easy to clean! The HEATWAVE MILK WARM...

    View full details
    $1,495.00
  • from $1,350.00

    Ritchie Calving Gate 1060G

    Ritchie

    This Ritchie Calving Gate features a number of unique benefits to help stock farmers improve stock handling safety.The securing gate, with its uniq...

    View full details
    from $1,350.00
  • $1,350.00

    Ritchie Calf Dehorning Chute

    Ritchie

    Main features:  Minimizes stress to stock and operator The neck yoke is operated by single lever which automatically locks at any position and is...

    View full details
    $1,350.00
  • $525.00

    Ritchie - Calf Creep Panel - 1049G

    Ritchie

     Main features:  Robust unit with easily adjusted header rail to exclude cows from feed area Easily located using joining pins Hot dipped galvan...

    View full details
    $525.00
  • $370.00

    Digital Weigh-Head Conversion Kit - 3663-CONKIT

    Ritchie

    The Ritchie Digital Weigh-Head Conversion Kit gives you another option for weighing.  Main features:  Compatible with 345G, 660G and 663G Convers...

    View full details
    $370.00
  • from $330.00

    Te Pari LPG Calf Dehorners

    Te Pari

    QUICK, EFFECTIVE AND EFFICIENT. The Te Pari LPG Calf Dehorner is a NZ-made, fully portable LPG gas fired unit that will constantly maintain a high ...

    View full details
    from $330.00
  • $299.50

    THERMOSTAT SUB-ASSEMBLY (Parts for Heatwave)

    Pyon Products

     The Thermostat sub - assembly for repair of the Heatwave Milk Warmer.  This item is very seldom requested for repair.   

    $299.50
  • $245.00

    1500 Mat Heater (Parts for Heatwave)

    Pyon Products

     The 1500 Mat heater is for repair of the Heatwave Milk Warmer.  This item is seldom requested for repair.

    $245.00
  • $135.00

    Spare Dehorner head for Te Pari LPG Calf Dehorners

    Te Pari

    The Te Pari LPG Calf Dehorner comes standard with the 18 mm dehorning tips. Sizes 14mm, 16mm, 18mm, and 20mm tips can be purchased as spares.   

    $135.00
  • from $124.75

    Grober Milk Replacer for use with the Heatwave Milk Warmer

    Grober Nutrition

    ASK US ABOUT LARGER ORDER DISCOUNTS. The Grober mildly acidified milk replacer makes an excellent fit with the Heatwave Milk Warmer and other autom...

    View full details
    from $124.75
  • from $70.00

    VS Injector - Simcro

    Datamars

    Simcro VS Injector Designed for swine and beef producers, the Simcro VS Injector gives you ultimate flexibility to protect you, your staff, your...

    View full details
    from $70.00
  • from $65.00

    Mitrocin for Heatwave Machine Cleaning

    Dairy Supply Store

    One gallon of Mitrocin cleaner should allow for about 128 weeks of cleaning your Heatwave Milk Warmer and 8oz. can last about 16 weeks. This produc...

    View full details
    from $65.00
  • $54.55

    Heat Exchange Coil for Heatwave Milk Warmer

    Pyon Products

     The Heatwave Exchange Coil is a key component in the Heatwave Milk Warmer as it is needed to warm the milk for the youngstock. It is important to ...

    View full details
    $54.55
  • $49.50

    VS Injector Ink Stamp -Simcro

    Datamars

    Use the ink stamps to mark your treated livestock with the Simcro VS Injector guns. Each stamp should be able to mark about 300 livestock. Comes in...

    View full details
    $49.50
  • from $45.95

    Grober Bovine Dried Colostrum - Calf's Choice Total

    Grober Nutrition

    Grober's High Quality Calf Colostrum can be purchased in 700 g or 4.7 kg packaging. Natural bovine dried colostrum replaces or supplements materna...

    View full details
    from $45.95
  • $45.00

    Inlet Pair including Bubble Pumps for Heatwave Milk Warmer

    Pyon Products

    Heatwave Inlet pipes (Pair) with Bubble Pumps includes Silicone tube, 2 Yellow filters, 2 Stainless steel weights, 2 Inline Bubble Pumps, and 2 Pla...

    View full details
    $45.00
  • $44.00

    Outlet Pair for Heatwave Milk Warmer

    Pyon Products

    Heatwave Outlet pipes (Pair) includes Silicone tube, 2 "Y" Connectors, 4 non-return valves and 2 Plastic connectors to fit into the Heatwave Milk W...

    View full details
    $44.00
  • $28.95

    Inlet Pair for Heatwave Milk Warmer

    Pyon Products

    Heatwave Inlet pipes (Pair) includes Silicone tube, 2 Yellow filters, 2 Stainless steel weights, 2 Straight Barbed connectors, and 2 Plastic connec...

    View full details
    $28.95
  • $17.95

    13 AMP CIRCUIT BREAKER (Parts for Heatwave)

    Pyon Products

     The 13 amp circuit breaker is for repair of the Heatwave Milk Warmer.  This item is sometimes requested for repair and could be helpful to have on...

    View full details
    $17.95
  • $16.05

    Bubble Pump for Heatwave Milk Warmer

    Pyon Products

    The Bubble pump will allow you to clean the pipes and prime the system easily, quickly and without disconnecting pipes.  Two Bubble Pumps come stan...

    View full details
    $16.05
  • $15.20

    Barrel Tap 10mm Outlet for Heatwave Milk Warmer

    Pyon Products

     The Barrel Tap doesn't automatically come with the purchase of the Heatwave Milk Warmer but is  recommended if using a barrel for feeding calves. ...

    View full details
    $15.20
  • $13.00

    Heatwave Machine Cleaning Tablets

    Pyon Products

    One box of cleaning tablets should last for about 6 weeks of cleaning your Heatwave Milk Warmer.   This product has been tested with the Heatwave t...

    View full details
    $13.00
  • $11.95

    THERMAL CUT OUT SWITCH 55 deg. c (Parts for Heatwave)

    Pyon Products

     The Thermal cutout switch is for repair of the Heatwave Milk Warmer.  This item is occasionally requested for repair.   

    $11.95
  • $10.00

    VS Non-Needle Guard Assembly -Simcro

    Datamars

    Non-Needle Guard Assembly. Use with Simcro VS Injector guns.

    $10.00
  • $9.95

    Standard Stokbord Plate - Pre Drilled for Heatwave Milk Warmer

    Pyon Products

     The Standard Stockbord Plate is used to mount the Bayonet Fittings for the Heatwave Milk Warmer 

    $9.95
  • $9.65

    Teat Bayonet Fitting and screws for Heatwave Milk Warmer

    Pyon Products

     The Teat Bayonet fittings used for the Heatwave Milk Warmer fit the Lamb/Goat starter teats, regular teats and calf teats. 

    $9.65
  • $8.10

    Bulkhead Push-Fit Assembly for Heatwave Milk Warmer 8mm

    Pyon Products

      The Bulkhead Push-Fit Assembly helps to attach the silicone tube to the Heatwave Milk Warmer.   

    $8.10
  • $7.70

    Reducing "Y" Connector 10mm to 2x 6mm for Heatwave Milk Warmer

    Pyon Products

    The Heatwave Reducing "Y" Connector 10mm to 2x 6mm can be used with a barrel tap in a large storage container to connect the silicone tubes of the ...

    View full details
    $7.70
  • $5.95

    Right Angle Connector 10mm to 6mm for Heatwave Milk Warmer

    Pyon Products

    The Heatwave Right Angle Connector 10mm to 6mm can be used to connect the silicone tubes of the outlet pipes coming from the Heatwave Milk Warmer. ...

    View full details
    $5.95
  • $5.95

    Non-Return Valve for Heatwave Milk Warmer

    Pyon Products

     The Non-Return Valve is a key component in the Heatwave Milk Warmer as it helps prevent milk from dripping out of the teats as well as keeping mil...

    View full details
    $5.95
  • $5.85

    Metal Connector/Weight for Heatwave Milk Warmer

    Pyon Products

     The Metal Connector/Weight is used with the silicone tubes for the Heatwave Milk Warmer 

    $5.85
  • $5.40

    Silicone Tube for Heatwave Milk Warmer (per Meter)

    Pyon Products

    The picture shows a role of 5 meters of silicone tubing. The price is $5.40 per meter.  Silicone Tubing for 4 nipples comes standard with the purch...

    View full details
    $5.40
  • $3.05

    Y Connector 6mm for Heatwave Milk Warmer

    Pyon Products

     The 6mm Y Connector is used for connecting silicone tubes for the Heatwave Milk Warmer.

    $3.05
  • $2.95

    Heatwave Calf Teat

    Pyon Products

    The Heatwave Milk Warmer comes with 4 calf teats. Extras can be purchased so you don't need to worry about running out.

    $2.95
  • $2.65

    Plastic Push-in Connector for Heatwave Milk Warmer

    Pyon Products

     The Plastic Push-in Connector is used for connecting the silicone tubes to other components in  the Heatwave Milk Warmer.

    $2.65
  • $2.15

    Wrench -8mm for Heatwave Milk Warmer

    Pyon Products

     The 8mm open ended wrench can be used to press in the on collet on the Heatwave Bulkhead Push fit Assembly unit to help release the connectors. Af...

    View full details
    $2.15
  • $1.95

    Straight Barbed Pipe Connector for Heatwave Milk Warmer

    Pyon Products

    The Straight Barbed Pipe Connector connects the silicone tube at a point where the pump can be connected. It is always great to have some of these ...

    View full details
    $1.95
  • $1.35

    Collet for Heatwave Milk Warmer 8mm

    Pyon Products

     The Collet is Part of the Heatwave Bulkhead Push fit Assembly 8mm which helps to attach the silicone tube to the Heatwave Milk Warmer.   

    $1.35
  • $1.20

    Yellow Filter for Heatwave Milk Warmer

    Pyon Products

     The Yellow Filter is used at the end of silicone tubes to help keep large pieces out that might plug up the Heatwave Milk Warmer.

    $1.20